Autoland Status Annunciators

Push/Reset (P/RST) Switch

PUSH - resets both pilots annunciators as follows:

• Before APP mode selected
  • changes NO AUTOLAND or NO LAND 3 to blank. If condition still exists when switch released, annunciation returns.
  • if NO AUTOLAND displayed, remains displayed until autopilots disengaged.
• After APP mode selected
  • if NO LAND 3 displayed, becomes blank. Remains blank until after landing and autopilots disengaged.
  • if NO AUTOLAND displayed, remains displayed until autopilots disengaged.

Autoland Status Annunciator (upper-green)

(blank) - Normal

	indicates all 3 autopilot systems, with their airplane system inputs, are operating normally. appears below 1500 ft radio altitude with LOC and G/S captured.
	indicates a minimum of 2 autopilot systems, with their airplane system inputs, are operating normally. appears below 1500 ft radio altitude with LOC and G/S captured.

Autoland Status Annunciator (lower-amber)

(blank) - Normal

	indicates fault conditions exist which preclude the use of the autopilots for an automatic landing.
	indicate a fault condition exist which results in a LAND 2 annunciation.

Test Switch

(push to test) Provides a test of the ASA display:

Test 1

Test 2