Remove Discontinuities

A discontinuity exists when two waypoints are not connected by a route segment.

To remove a discontinuity, copy the subsequent waypoint from the route into the scratchpad and enter it into the discontinuity.

1 Discontinuity

The active route has a discontinuity after BTG. The example shows how to fly direct from BTG to OAK. Copy OAK to the scratchpad. Any subsequent waypoint in the route can be selected to the scratchpad to remove the discontinuity.

2 Continuous Route

Select OAK to the boxes to remove the discontinuity.

If a waypoint which does not already exist on the route is entered into the boxes the discontinuity moves one waypoint further down the route.

Standard | 11.42.5 | Direct & Intercept Course>