Performance Factors
The Maintenance Index page is only available when the aircraft is on the ground.
INDEX - Displays the Maintenance page.
- - - Performance factors go to the default values when a data base is put in. If other than the standard values are used then they must be put in again. When the two FMCs are on, the factors are changed in the two FMCs at the same time. The new values are kept in the FMC when power is removed.
To modify data, type the word ARM into the scratchpad and then press Line Select key R5. The word ARM will now appear at R5. Data may now be modified.
To modify data, type the word ARM into the scratchpad and then press Line Select key R5. The word ARM will now appear at R5. Data may now be modified.